Aim MyChron3 Basic Manuel d'utilisateur télécharger pdf (Page 16)

Installing the RPM clip

The RPM sensor clips directly on the spark plug wire. While running the RPM

cable along the chassis between the MyChron 3 display unit and the spark plug

wire, the RPM cable should be positioned as far as possible from the

thermocouple wire, to prevent interference.

It is suggested to use cable ties to securely attach the RPM cable along the

chassis to prevent damage.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Pas de commentaire

Aim MyChron3 Basic Manuel d'utilisateur Page 16